Shoulder Belt Replacement - Rear

Shoulder Belt Replacement - Rear

Removal Procedure




1. Remove the bolt (1) and the seat belt anchor on the wheelhouse trim panel.




2. Remove the upper back panel shelf.
3. Remove the bolt (1) and the seat belt retractor (2).

Installation Procedure






Notice: Refer to Fastener Notice.

1. Install the seat belt retractor (2) with the bolt (1).

Tighten the seat belt retractor bolt to 38 N.m (28 lb ft).

2. Install the upper back panel shelf.




3. Install the seat belt anchor to the upper wheelhouse trim panel with the bolt (1).

Tighten the seat belt anchor bolt to 38 N.m (28 lb ft).