Stabilizer Link: Service and Repair

Stabilizer Shaft Link Replacement

Removal Procedure





Notice: Refer to Vehicle Lifting.

1. Lift and suitably support the vehicle, allowing the front suspension to hang free.
2. Remove the front wheel.
3. Remove the stabilizer shaft-to-knuckle nut and the shaft-to-link nut.




4. Disconnect the stabilizer shaft from the knuckle by removing the stabilizer shaft link assembly.

Installation Procedure




1. Install the stabilizer shaft into the vehicle.

Notice: Refer to Fastener Notice.

2. Install the stabilizer shaft-to-knuckle nut and the shaft-to-link nut.

Tighten the stabilizer shaft link nuts to 50 N.m (37 lb ft).

3. Install the front wheel.
4. Lower the vehicle.