Canister Vent Valve: Service and Repair

Evaporative Emission Canister Vent Solenoid Valve Replacement

Removal Procedure

Important: Clean the evaporative emission (EVAP) connections and surrounding areas prior to disconnecting the line in order the avoid possible system contamination.




1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the EVAP canister vent solenoid valve electrical connector.




3. Disconnect the EVAP canister vent solenoid valve from the EVAP emission canister hose.




4. Remove the EVAP canister vent solenoid valve bracket bolt.
5. Remove the EVAP canister vent solenoid valve.

Installation Procedure




1. Install the EVAP canister vent solenoid valve.

Notice: Refer to Fastener Notice.

2. Install the EVAP canister vent solenoid valve bracket bolt.

Tighten the bolt to 10 N.m (89 lb in).




3. Connect the EVAP canister vent solenoid valve to the EVAP emission canister hose.




4. Connect the EVAP canister vent solenoid valve electrical connector.
5. Lower the vehicle.