1-2 Shift Solenoid Valve Replacement

1-2 Shift Solenoid Valve Replacement

Removal Procedure

1. Remove the case side cover. Refer to Control Valve Body Cover Replacement (Control Valve Body Cover Replacement) .
2. Disconnect the 1-2 shift solenoid electrical connector.
3. Remove the 1-2 shift solenoid retaining clip (314D)




4. Remove the 1-2 shift solenoid (315A).



Installation Procedure





1. Install the 1-2 shift solenoid (315A).
2. Install the 1-2 shift solenoid retaining clip (314D).
3. Connect the 1-2 shift solenoid electrical connector.
4. Install the case side cover. Refer to Control Valve Body Cover Replacement (Control Valve Body Cover Replacement) .