Digital Radio Antenna Replacement

Digital Radio Antenna Replacement

Removal Procedure

1. Lower the headliner leaving the wiring harness attached. Refer to Headlining Trim Panel Replacement (Extended Sedan) Headlining Trim Panel Replacement (Sedan).
2. Remove the attachment nut from the antenna.
3. Disconnect the cable from the antenna.




4. Remove the antenna from the vehicle.

Installation Procedure




1. Install the antenna to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the attachment nut to the antenna.

Tighten the nut to 9 N.m (80 lb in).

3. Connect the cable to the antenna.
4. Install the headliner.