Sunshade Replacement (Sedan)

Sunshade Replacement (Sedan)

Removal Procedure

1. Remove the sunshade from the sunshade retainer.
2. Remove the cover from the screws.




3. Remove the screws.
4. Remove the sunshade.
5. Disconnect the electrical connector, if equipped.



Installation Procedure





1. Connect the electrical connector.

Notice: Refer to Fastener Notice .

2. Position the sunshade and install the screws.

Tighten the screws to 2.5 N.m (22 lb in).

3. Install the cover to the sunshade screws.
4. Install the sunshade to the sunshade retainer.