Brake Pressure Modulator Valve Bracket Replacement

Brake Pressure Modulator Valve Bracket Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the left front tire and wheel assembly.
3. Turn the ignition switch to the OFF position.




4. Remove the 3 nuts that attach the brake pressure modulator valve (BPMV) bracket to the left front wheelhouse.




5. Remove the 4 insulator bolts that attach the BPMV to the bracket.
6. Carefully lift the brake modulator assembly just enough to clear the bracket, then support the assembly.
7. Remove the bracket from the vehicle.

Installation Procedure




1. Install the bracket to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the 4 insulator bolts.

Tighten the bolts to 10 N.m (86 lb in).




3. Install the 3 nuts that attach the bracket to the left front wheelhouse.

Tighten the nuts to 10 N.m (86 lb in).

4. Install the left front tire and wheel assembly.
5. Lower the vehicle.