Emergency Contact Module: Service and Repair

OnStar Module Bracket Assembly Replacement

Removal Procedure

1. Remove the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (Service and Repair) .
2. Remove the communication interface module. Refer to Communication Interface Module Replacement (Service and Repair) .




3. Remove the OnStar bracket bolts.




4. Remove the OnStar module bracket.



Installation Procedure





1. Install the OnStar module bracket.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Tighten the OnStar bracket bolts.

Tighten the bolts to 10 N.m (89 lb in).

3. Install the communication interface module. Refer to Communication Interface Module Replacement (Service and Repair) .
4. Install the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (Service and Repair) .