Stabilizer Shaft Insulator Replacement (Base Sedan)

Stabilizer Shaft Insulator Replacement (Base Sedan)

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service Intervals) .




2. Remove the stabilizer shaft insulator bracket retaining bolt.
3. Remove the stabilizer shaft and insulator.



Installation Procedure





1. Install the stabilizer shaft insulator.
2. Install the stabilizer shaft insulator brackets.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the stabilizer shaft insulator retaining bolt.

Tighten the stabilizer shaft insulator retaining bolt to 35 N.m (26 lb ft).

4. Lower the vehicle.