Front Bumper Fascia Replacement

Front Bumper Fascia Replacement












2.Remove the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement .

3.Remove the engine splash shield. Refer to Engine Splash Shield Replacement Engine Splash Shield Replacement .

1Front Fascia Bolt
Notice:Refer to Fastener Notice .

Procedure
Remove the bolt from the front fascia bracket.
Tip Reach underneath the wheelhouse to access the bolts.
Tighten6 N �m (53 lb in)

2Front Fascia Bolt

Procedure
Loosen the bolt in the front fascia bracket.
Tighten6 N �m (53 lb in)

3Front Fascia

Procedure
Pull the front fascia to disconnect from the fender side.

4Front Fascia

Procedure
Pull up on the front fascia to disconnect from the upper fender.

5Front Bumper Fascia

Procedure

1.Disconnect any electrical connectors.

2.Transfer components as necessary.