Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine

Evaporative Emission Hoses/Pipes Replacement - Engine

Removal Procedure




1. Remove the intake manifold cover.
2. Remove the air cleaner outlet duct.
3. Disconnect the engine evaporative emission (EVAP) line quick connect fitting from the canister purge solenoid valve.
4. Disconnect the engine EVAP line quick connect fitting from the intake manifold.
5. Remove the engine EVAP line (1).

Installation Procedure




1. Install the engine EVAP line (1).
2. Connect the engine EVAP line quick connect fitting to the intake manifold.
3. Connect the engine EVAP line quick connect fitting to the canister purge solenoid valve.
4. Install the air cleaner outlet duct.
5. Install the intake manifold cover.