Rear Seat Back Cushion Frame Replacement

Rear Seat Back Cushion Frame Replacement

Removal Procedure




1. Remove the rear seat cushion.
2. Remove the rear seat belt buckles.
3. Remove the rear seat belt lower anchors.
4. Fold the rear seat backs to the floor.




5. Remove the forward seat frame bolt caps and bolts from the rear seat frame.
6. Remove the rear seat backs and frame from the vehicle.




7. Remove the rear upper seat back frame bolts.




8. Release the clip that retains the seat back side cushion cover and pad to the seat back frame from the rear of the seat by squeezing the clip together using needle nose pliers or similar tool and pulling out to remove.
9. Remove the rear seat back side cushion covers and pads by pulling outward on the top and then upward.




10. Remove the rear seat back bolts.
11. Remove the rear seat backs from the rear seat back frame.

Installation Procedure




1. Install the rear seat backs to the rear seat back frame.

Notice: Refer to Fastener Notice.

2. Install the rear seat back to seat back frame bolts.

Tighten the fasteners to 35 N.m (26 lb ft).




3. Install the rear seat back side cushion cover and pad to the seat frame.




4. Install the seat back and frame to the vehicle.
5. Install the upper seat back frame bolts.

Tighten the fasteners to 35 N.m (26 lb ft).




6. Install the lower seat back frame bolts and caps.

Tighten the fasteners to 35 N.m (26 lb ft).




7. Install the rear seat belt lower anchors.

Tighten the fasteners to 45 N.m (33 lb ft).

8. Install the rear seat belt buckles.
9. Install the rear seat cushion.