4T45-E - Automatic Transaxle

Floor Shift Control Cable Replacement

Removal Procedure

1. Set the park brake and chock the wheels.




2. Disconnect the transaxle shift control cable terminal (1) from the transaxle manual shift lever pin (5).
3. Remove the retainer (2) from the transaxle shift control cable.
4. Press the locking tabs inward in order to release the transaxle shift control cable (3) from the cable bracket (4).
5. Remove the console. Refer to Front Floor Console Replacement .




6. Disconnect the transmission range selector lever cable terminal (2) from the shift lever pin.
7. Release the transmission range selector lever cable retainer (1) and remove the transmission range selector cable from the transmission control lever base.




8. Release the transmission range selector lever cable retainer (1).




9. Remove the transmission range selector lever cable grommet (1) from the cowl panel.
10. Remove the transmission range selector lever cable from the vehicle.



Installation Procedure





1. Install the transmission range selector lever cable to the vehicle.
2. Install the transmission range selector lever cable grommet (1) to the cowl panel.




3. Attach the transmission range selector lever cable retainer (1).




4. Install the transmission range selector lever cable to the transmission control lever base. Insure the cable retainer (1) is fully secured to the transmission control lever base.
5. Connect the transmission range selector lever cable terminal (2) to the shift lever pin.
6. Install the console. Refer to Front Floor Console Replacement .




7. Install the transaxle shift control cable (3) to the cable bracket (4).
8. Install the retainer (2) to the transaxle shift control cable.
9. Connect the transaxle shift control cable terminal (1) to the transaxle manual shift lever pin (5).
10. Adjust the automatic transmission range selector lever cable. Refer to Range Selector Lever Cable Adjustment (Adjustments) .