Transmission Brace Replacement

Transmission Brace Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .




2. Remove the transaxle brace bolts (1, 3).
3. Remove the transaxle brace (2).



Installation Procedure





1. Install the transaxle brace (2).

Notice: Refer to Fastener Notice .

2. Install the transaxle brace bolt (1).

Tighten the bolt to 50 N.m (37 lb ft).

3. Install the transaxle brace bolt (3).

Tighten the bolt to 100 N.m (74 lb ft).

4. Lower the vehicle.