Exhaust Manifold Lower Heat Shield Replacement (LY7)

Exhaust Manifold Lower Heat Shield Replacement (LY7) (3.6L)

Removal Procedure





1. Remove the catalytic converter. Refer to Catalytic Converter Replacement - Right Side (LZ4) (Service and Repair)Catalytic Converter Replacement - Right Side (LY7) (Catalytic Converter Replacement - Right Side (LY7)) .
2. Remove the exhaust manifold lower heat shield bolts (1, 2).
3. Remove the exhaust manifold lower heat shield.



Installation Procedure





1. Position the exhaust manifold lower heat shield to the engine.

Notice: Refer to Fastener Notice .

2. Install the exhaust manifold lower heat shield bolts (1, 2).

* Tighten the bolt (1) to 10 N.m (89 lb in).
* Tighten the bolt (2) to 50 N.m (37 lb ft).


3. Install the catalytic converter. Refer to Catalytic Converter Replacement - Right Side (LZ4) (Service and Repair)Catalytic Converter Replacement - Right Side (LY7) (Catalytic Converter Replacement - Right Side (LY7)) .