Fuel Supply Line: Service and Repair

Fuel Feed Pipe Replacement

Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning (Service Precautions).


1. Open the hood.
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Battery Negative Cable Disconnection and Connection).
3. Relieve the fuel pressure. Refer to Fuel Pressure Relief (Service and Repair).




4. Disconnect the fuel feed pipe connector (3) from fuel injector rail. Refer to Plastic Collar Quick Connect Fitting Service (Service and Repair).
5. Unclip the fuel feed pipe (1) from the retainer clip (4).
6. Close the fuel feed pipe connector with a suitable cap.
7. Unclip the fuel feed pipe from the bulk head retainer clip (2).
8. Remove the drivetrain and front suspension frame. Refer to Drivetrain and Front Suspension Frame Replacement (Service and Repair).




9. Open the 4 fuel pipe clips (2).
10. Remove the fuel feed pipe (1) from lower bulkhead and underbody.




11. Disconnect the fuel tank feed pipe connector (1) from the fuel feed pipe. Refer to Plastic Collar Quick Connect Fitting Service (Service and Repair).
12. Close the fuel feed pipe and fuel tank feed pipe with suitable caps.
13. Disconnect the fuel pressure sensor wiring harness plug (2).
14. Open the rear fuel pipe clip and remove the fuel feed pipe.

Installation Procedure

1. Remove the caps from fuel feed tank pipe and fuel feed pipe.




2. Install the fuel feed pipe and secure with the rear fuel pipe clip.
3. Connect the fuel tank feed pipe connector (1) to the fuel feed pipe. Refer to Plastic Collar Quick Connect Fitting Service (Service and Repair).
4. Connect the fuel pressure sensor wiring harness plug (2).




5. Install the fuel feed pipe (1) to lower bulkhead and underbody.
6. Close the 4 fuel pipe clips (2).
7. Install the drivetrain and front suspension frame. Refer to Drivetrain and Front Suspension Frame Replacement (Service and Repair).




8. Clip the fuel feed pipe to the bulk head retainer clip (2).
9. Clip the fuel feed pipe (1) to the retainer clip (4).
10. Connect the fuel feed pipe connector (3) to the fuel injector rail. Refer to Plastic Collar Quick Connect Fitting Service (Service and Repair).
11. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Battery Negative Cable Disconnection and Connection).
12. Close the hood.