P15F0
DTC P15F0
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle Diagnostic System Check - Vehicle prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis Strategy Based Diagnosis for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions Diagnostic Procedure Instructionsprovides an overview of each diagnostic category.
DTC Descriptor
DTC P15F0
- Engine Torque Delivered Signal Message Counter Incorrect
Circuit/System Description
This diagnostic applies to internal microprocessor integrity conditions within the hybrid powertrain control module. The hybrid powertrain control module is internal to the power inverter module, often referred to as the drive motor generator power inverter module, and is not serviced separately. The hybrid powertrain control module monitors its ability to read and write to the memory. The hybrid powertrain control module processor monitors the data to verify that the indicated engine torque delivered calculation is correct.
Conditions for Running the DTC
* Vehicle is ON.
* The system voltage is 8-18 V.
Conditions for Setting the DTC
The control module has detected an internal malfunction.
Action Taken When the DTC Sets
* DTC P15F0 is a Type A DTC.
* The hybrid powertrain control module requests the hybrid powertrain control module 2 to open the high voltage contactor relays.
Conditions for Clearing the DTC
DTC P15F0 is a Type A DTC.
Reference Information
DTC Type Reference
Powertrain Diagnostic Trouble Code (DTC) Type Definitions Powertrain Diagnostic Trouble Code (DTC) Type Definitions
Circuit/System Verification
If the DTC is set, program the T6 power inverter module. If the DTC resets, replace the T6 power inverter module.
Repair Instructions
Perform the Diagnostic Repair Verification Verification Tests after completing the diagnostic procedure.
Control Module References Control Module References for Drive Motor Generator Power Inverter Module, also called the power inverter module, replacement, programming, and setup.