Trunk / Liftgate: Adjustments

Liftgate Adjustment

1. Loosen the striker.
2. Loosen the hinge-to-roof panel bolts for forward or rearward adjustments.
3. Loosen the liftgate-to-hinge bolts for up and down adjustment.
4. Move the liftgate within the liftgate opening to achieve the best alignment and operation.
5. Adjust the striker to achieve the best operation and alignment of the liftgate.
6. Inspect the seals for proper engagement.

Caution: Refer to Fastener Caution .

7. Tighten the bolts when the proper adjustment is achieved. Tighten the liftgate hinge and striker bolts to 25 Nm (18 lb ft).