Hybrid/EV Battery Pack Capacity Learn

Hybrid/EV Battery Pack Capacity Learn

The Hybrid/EV Battery Pack Capacity Learn procedure must be completed when the following components are replaced:

Hybrid/EV Powertrain Control Module 2
Hybrid/EV Battery Energy Control Module
Hybrid/EV Battery Interface Control Module
Hybrid/EV Battery Pack

The Hybrid/EV Powertrain Control Module 2 Capacity Learn procedure can be completed with a scan tool using the following steps:

Install the scan tool to the data link connector.
Vehicle in Service Mode, engine OFF.
Select Hybrid/EV Battery Pack Capacity Reset in the Hybrid/EV Powertrain Control Module 2 Control Functions list
Follow the scan tool directions to complete the procedure.
Select Hybrid/EV Battery Pack Capacity Learn in the Hybrid/EV Powertrain Control Module 2 Control Functions list
Follow the scan tool directions to complete the procedure.
Clear any DTCs that may be set.