Engine Oil Cooler Inlet Pipe Replacement

Engine Oil Cooler Inlet Pipe Replacement (1.4L LUH, LUJ)

Removal Procedure

1. Drain coolant fluid. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Static Fill)Cooling System Draining and Filling (GE-47716 Fill) Cooling System Draining and Filling (GE-47716 Fill).
2. Remove the warm up three way catalytic converter. Refer to Warm Up Three-Way Catalytic Converter Replacement (1.4L LUH and LUJ) Warm Up Three-Way Catalytic Converter Replacement.
3. Remove the engine oil cooler inlet hose from the engine oil cooler inlet pipe. Refer to Engine Oil Cooler Inlet Hose Replacement (1.4L LUH and LUJ) Engine Oil Cooler Inlet Hose Replacement.




4. Remove the turbocharger coolant return pipe hose clamp (3).
5. Remove the turbocharger coolant return pipe hose (2) from the engine oil cooler inlet pipe.

Note: Do not move the turbocharger coolant return pipe too much. An excessive moving of the turbocharger coolant return pipe could cause leakage.

6. Remove the turbocharger coolant return pipe bolt (1).




7. Remove the engine oil cooler bolt (1).
8. Remove the engine oil cooler inlet pipe bolt (4).
9. Remove the engine oil cooler inlet pipe (2) and the seal ring (3).

Installation Procedure




1. Install the engine oil cooler inlet pipe (2) in compound with a NEW seal ring (3).
2. Install the engine oil cooler bolt (1).

Caution: Refer to Fastener Caution Fastener Caution.

3. Install the engine oil cooler inlet pipe bolt (4) and tighten to 10 Nm (89 lb in).
4. Tighten the engine oil cooler bolt (1) to 20 Nm (15 lb ft).




5. Install the turbocharger coolant return pipe hose (2) to the engine oil cooler inlet pipe.
6. Install the turbocharger coolant return pipe hose clamp (3).
7. Install turbocharger coolant return pipe bolt (1) and tighten to 10 Nm (89 lb in).
8. Install the engine oil cooler inlet hose to the engine oil cooler inlet pipe. Refer to Engine Oil Cooler Inlet Hose Replacement (1.4L LUH and LUJ) Engine Oil Cooler Inlet Hose Replacement.
9. Install the warm up three way catalytic converter. Refer to Warm Up Three-Way Catalytic Converter Replacement (1.4L LUH and LUJ) Warm Up Three-Way Catalytic Converter Replacement.
10. Fill up coolant fluid. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Static Fill)Cooling System Draining and Filling (GE-47716 Fill) Cooling System Draining and Filling (GE-47716 Fill).