Front Wheel Drive Shaft Seal Replacement - Right Side

Front Wheel Drive Shaft Seal Replacement - Right Side (1.4L LUJ)

Special Tools
* DT-519 - Installer Drift
* DT-586 - Remover Hook
* DT-7004 - Slide Hammer

For equivalent regional tools, refer to Special Tools M20/M32 - Manual Transmission.

Removal Procedure

1. Remove front wheel drive intermediate shaft. Refer to Front Wheel Drive Intermediate Shaft Replacement Front Wheel Drive Intermediate Shaft Replacement.




2. Remove front wheel drive shaft oil seal (1) using DT-7004 - slide hammer (3) in conjunction with DT-586 - hook (2).

Installation Procedure





Note: Coat seal lips with NEW transmission fluid.

1. Install NEW front wheel drive shaft oil seal (1) using DT-519 - installer drift (2) with hammer.
2. Install front wheel drive intermediate shaft. Refer to Front Wheel Drive Intermediate Shaft Replacement Front Wheel Drive Intermediate Shaft Replacement.