Transmission Rear Mount Replacement

Transmission Rear Mount Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.





2. Remove and DISCARD the rear transmission mount bracket to rear mount through bolt (1).

3. Remove rear transmission mount to frame bolt (3).

4. Push and hold the powertrain assembly forward and then remove rear transmission mount.

Installation Procedure





1. Push and hold the powertrain assembly forward and then install rear transmission mount.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install rear transmission mount to frame bolt (3) and tighten to 100 Nm (74 lb ft).

3. Install the NEW rear transmission mount bracket to rear mount through bolt (1) and tighten to 80 Nm (59 lb ft) plus 45-60 degrees.

4. Lower the vehicle.