Fuel Filler Hose: Service and Repair

Fuel Tank Filler Pipe Replacement (Steel Tank)

Removal Procedure





1. Remove the fuel filler door housing. Refer to Fuel Tank Filler Door Latch Housing Replacement .

2. Remove the bracket fastener (1).





3. Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

4. Remove the fuel tank filler pipe bracket fastener (1).

5. Remove the vent hose clamp (2) and vent hose.

6. Loosen the filler pipe hose clamp (3).





7. Remove the fuel tank filler pipe (1).

Installation Procedure





1. Install the fuel tank filler pipe (1).





Caution:
Refer to Fastener Caution Fastener Caution.

2. Tighten hose clamp (3) to 4 Nm(35 lb in).

3. Install the vent hose clamp (2) and vent hose.

4. Tighten the filler pipe bracket fastener (1) to 9 Nm(89 lb in).





5. Install the bracket fastener (1) and tighten to 9 Nm(89 lb in).

6. Install the fuel filler door housing. Refer to Fuel Tank Filler Door Latch Housing Replacement .