Radiator Inlet Hose Replacement

Radiator Inlet Hose Replacement

Special Tools

BO-38185 - Hose Clamp Pliers

For equivalent regional tools, Refer to Special Tools Tools and Equipment

Removal Procedure

Note: Replace corroded hose clamps and brackets.

1. Drain the cooling system. Refer to Cooling System Draining and Filling Cooling System Draining and Filling
2. Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement Air Cleaner Resonator Outlet Duct Replacement




3. Remove the radiator inlet hose clamp (1) at the engine using BO-38185 - Hose Clamp Pliers.
4. Remove the radiator inlet hose (2) from the engine.




5. Remove the radiator inlet hose clamp (1) at radiator using BO-38185 - Hose
Clamp Pliers.
6. Remove the radiator inlet hose (2) from the radiator.
7. Remove the radiator inlet hose from the vehicle.

Installation Procedure




1. Install the radiator inlet hose to the vehicle.
2. Install the radiator inlet hose (2) to the radiator.
3. Install the radiator inlet hose clamp (1) at radiator using BO-38185 - Hose Clamp Pliers.




4. Install the radiator inlet hose (2) to the engine.
5. Install the radiator inlet hose clamp (1) at engine using BO-38185 - Hose Clamp Pliers.
6. Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement Air Cleaner Resonator Outlet Duct Replacement
7. Fill the cooling system. Refer to Cooling System Draining and Filling Cooling System Draining and Filling