Radiator Outlet Front Hose Replacement
Radiator Outlet Front Hose Replacement
Special Tools
BO-38185 - Hose Clamp Pliers
For equivalent regional tools, Refer to Special Tools Tools and Equipment
Removal Procedure
Note: Replace corroded hose clamps and brackets.
1. Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement Air Cleaner Resonator Outlet Duct Replacement
2. Remove the heater coolant heater air supply hose from the radiator outlet front hose. Refer to Heater Coolant Heater Air Supply Hose Replacement Heater Coolant Heater Air Supply Hose Replacement
3. Disconnect the radiator outlet front hose quick connect (1) at engine.
4. Remove the radiator outlet front hose (2) from the engine.
Danger: Do not use a service jack in locations other than those specified to lift this vehicle. Lifting the vehicle with a jack in those other locations could cause the vehicle to slip off the jack and roll; this could cause injury or death.
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair
6. Remove the radiator outlet front hose clamp (1) at radiator using BO-38185 - Hose Clamp Pliers.
7. Remove the radiator outlet front hose (2) from the radiator.
8. Remove the radiator outlet front hose from the vehicle.
Installation Procedure
1. Install the radiator outlet front hose to the vehicle.
2. Install the radiator outlet front hose (2) to the radiator.
3. Install the radiator outlet front hose clamp (1) at radiator using BO-38185 - Hose Clamp Pliers.
4. Install the radiator outlet front hose (2) to the engine.
5. Connect the radiator outlet front hose quick connect (1) at engine.
6. Lower the vehicle.
7. Install the heater coolant heater air supply hose to the radiator outlet front hose. Refer to Heater Coolant Heater Air Supply Hose Replacement Heater Coolant Heater Air Supply Hose Replacement
8. Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement Air Cleaner Resonator Outlet Duct Replacement
9. Fill the cooling system. Refer to Cooling System Draining and Filling Cooling System Draining and Filling