Throttle Body Heater Outlet Hose Replacement

Throttle Body Heater Outlet Hose Replacement

Removal Procedure

1. Open the hood.

2. Place a collection basin under the vehicle.





3. Clip out the throttle body heater outlet hose from the intake manifold.

4. Loosen the clamp and disconnect the throttle body heater outlet hose (2) from the radiator surge tank (1).

5. Disconnect the throttle body heater outlet hose connector from the throttle body (3).

6. Remove the throttle body heater outlet hose (2).

Installation Procedure





1. Install the throttle body heater outlet hose (2).

2. Connect the throttle body heater outlet hose connector to the throttle body (3)

3. Connect the throttle body heater outlet hose (2) to the radiator surge tank (1) and install the clamp.

4. Clip in the throttle body heater outlet hose to the intake manifold





5. Top off the coolant by filling to the bottom line (black arrow) on the coolant surge tank (1), if necessary.

6. Close the hood.