Engine Coolant Fan Resistor Replacement

Engine Coolant Fan Resistor Replacement

Removal Procedure

1. Disconnect the negative cable from the battery. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.





2. Disconnect the engine coolant fan resistor wiring harness plug.

3. Remove the engine coolant fan resistor bolt (2).

4. Remove the engine coolant fan resistor (1).

Installation Procedure





1. Install the engine coolant fan resistor (1).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the engine coolant fan resistor bolt (2) and tighten to 4 Nm (36 lb in).

3. Connect the engine coolant fan resistor wiring harness plug.

4. Connect the negative cable to the battery. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.