Timing Component Alignment Marks: Locations

Refer to Camshaft Timing Chain Adjustment procedure.






Rotate the engine clockwise until the bore (2) in the crankshaft balancer aligns with the mark (1) on the engine front cover.





Note: The fixing tool should be installed completely to both camshaft grooves without high effort.

Adjust the camshafts so that the EN-953-A - fixing tool (1) can be installed.





Note: Push the fixing tool in the direction of the arrow to ensure it engages without clearance.

Install the EN-49977-200 - fixing tool (2) and adjust the gearing of the fixing tool so it engages with the intake camshaft sprocket gearing (1).




Loosen the intake camshaft sprocket bolt (2) while holding the hexagon of the intake camshaft with a wrench (1) until the camshaft position exciter wheel is clearly rotatable.

Loosen the exhaust camshaft sprocket bolt while holding the hexagon of the exhaust camshaft with a wrench until the camshaft position exciter wheel is clearly rotatable.