Diesel Data: Automotive Repair

Home >> Chevy Truck >> 1983 >> S10/T10 P/U 2WD V6-173 2.8L VIN B 2-bbl >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Procedures >> 200/200C Automatic Transmission >> Governor Pressure Switch Replace

Governor Pressure Switch Replace

1. Drain fluid and remove transmission pan.

2. Disconnect electrical connector from switch and remove switch using suitable tool.

3. Reverse procedure to install.

Diesel-Data.com