Rear

Auxiliary A/C Component View:

REMOVE OR DISCONNECT
1. Battery ground cable.
2. Rear duct (303).
3. Blower motor ground strap.
4. Blower motor lead wire.
5. Lower to upper blower-evaporator case screws.
6. Case and motor assembly (326) (336).

CAUTION: Before removing the case screws, support the lower case to prevent damage to the case or motor assembly.

7. Motor retaining strap.
8. Motor and wheels (330).
9. Wheel from the motor shaft.

INSTALL OR CONNECT
1. Wheels to the motor shaft (330).
^ Place the tension springs on the wheel hubs.
2. Motor and wheels to the case.
^ Align the wheels to prevent contact with the case.
3. Motor retaining strap and foam.
4. Lower case and blower motor assembly in the vehicle (336).
5. Lower to upper case screws.
^ Turn the blower wheels to prevent rubbing against the case.
6. Center ground strap.
7. Blower lead wire.
8. Rear duct.
9. Battery ground cable.