Service Procedure

FIGURE 1:

Refer to figure 1.

1. Remove the air cleaner assembly.

2. Locate the carburetor solenoid.

3. Inspection:

^ If there is a single wire pigtail which is pink with a black stripe connected to the anti-dieseling solenoid no further action is required. Proceed to step 4.

^ If there is nothing connected to the anti-dieseling solenoid locate the pink with a black stripe pigtail which is part of the engine harness and connect it to the anti-dieseling solenoid. Proceed to step 4.
SERVICE PROCEDURE

^ If there is a dark green electrical pigtail connected to the anti-dieseling solenoid unplug it and tape it back out of the way. Locate the pink with a black stripe pigtail which is part of the engine harness and connect it to the solenoid.

4. Reinstall air cleaner assembly.

5. Install Campaign Identification Label per instructions in this bulletin.

CAMPAIGN IDENTIFICATION LABEL:

CAMPAIGN IDENTIFICATION LABEL

Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label." Each label provides a space to include the five digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or ballpoint pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for periodic servicing by the owner.

Apply "Campaign Identification Label" only on a clean dry surface.