Front

REMOVE OR DISCONNECT
1. Battery ground cable.
2. Insulator
3. Blower motor lead and ground wires (134).
4. Blower motor cooling tube.
5. Blower assembly.
^ Case attaching screws.
^ Carefully pry the blower flange away from the case if the sealer acts as an adhesive.
6. Blower wheel from motor shaft.
^ Remove shaft nut.

INSTALL OR CONNECT
1. Blower wheel to the motor shaft.
2. Blower assembly.
^ Use a new bead of sealer on the flange.
3. Blower assembly.
4. Blower motor cooling tube.
5. Blower motor lead and ground wires.
6. Insulator.
7. Battery ground cable.