Drive/Propeller Shaft: Labor Times
| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes | |
| Replace | ||||
| Rear Axle | ||||
| 8.50 | ||||
| One Piece Driveline | ||||
| To Rear Axle | 0.6 | 0.0 | B | |
| Two Piece Driveline | ||||
| One | ||||
| Front Shaft | ||||
| With Slip Yoke | 0.7 | 0.0 | B | |
| Without Slip Yoke | 0.8 | 0.0 | B | |
| Rear Shaft | 0.6 | 0.0 | B | |
| Both | 0.7 | 0.0 | B | |
| Three Piece Driveline | ||||
| One | ||||
| Front Shaft | 1.2 | 0.0 | B | |
| Intermediate Shaft | 1.3 | 0.0 | B | |
| Rear Shaft | 1.2 | 0.0 | B | |
| All | 2.6 | 0.0 | B | |
| Note | ||||
| With Non-Slip Yoke, Add | 0.2 | 0.1 | B | |
| To Renew Center Support Bearing, Add | 0.5 | 0.3 | B |