Removal

For additional information see Removal Notes. Fundamentals and Basics

1. Siphon enough brake fluid out of the master cylinder to bring fluid level to 1/3 full to avoid fluid overflow when the caliper piston is pushed back into its bore.
2. Raise vehicle and remove front wheels.

Fig. 2 Compressing piston & shoes with C-clamp:

3. Using a C-clamp, push piston back into its bore.

Caliper Mounting Bolts:

4. Remove two mounting bolts and lift caliper away from disc.

Suspending Caliper:

5. Suspend caliper with a wire hook.

CAUTION: Do not allow caliper to hang from brake hose.