Air Door Cable: Service and Repair

Control Assembly:

Cable:

REMOVE OR DISCONNECT

1. Instrument panel trim bezel.

2. Screws (71).

^ Pull control assembly out.

3. Cables (67 and 72) at the control assembly (70) and heater assembly (11).

4. Cables (67 and 72).


INSTALL OR CONNECT

1. Cables (67 and 72) to the control assembly (70) and the heater assembly (11).

2. Control assembly (70) to the instrument panel (122).

3. Screws (61).

4. Instrument panel trim bezel.