| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Without Balance Shaft |
| Each Additional | 0.8 | 0.5 | A | Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Note |
| With AC, Add | 0.2 | 0.1 | A | Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders And Plastigage Bearings. |
| With Auto Trans, Add | 0.2 | 0.1 | | Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders And Plastigage Bearings. |
| To Grind Valves, Add | 2.8 | 2.0 | | Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders And Plastigage Bearings. |
| One CYL |
| Right Bank | 11.2 | 8.0 | A | Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Left Bank | 13.6 | 9.7 | A | Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Both Banks | 17.8 | 12.7 | A | Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders And Plastigage Bearings. |
| All Cyls |
| Right Bank | 12.6 | 9.0 | A | Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Left Bank | 15.0 | 10.7 | A | Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Both Banks | 20.2 | 14.4 | A | Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Main Bearings, Renew | 1.8 | 0.0 | A | Add The Following Operations If Performed Along With "Piston & Ring" Jobs. |
| Crankshaft, Renew | 4.4 | 0.0 | A | Add The Following Operations If Performed Along With "Piston & Ring" Jobs. |
| Oil Pump, Renew | 1.3 | 0.0 | A | Add The Following Operations If Performed Along With "Piston & Ring" Jobs. |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | Add The Following Operations If Performed Along With "Piston & Ring" Jobs. |
| Timing Chain, Renew | 2.0 | 0.0 | A | Add The Following Operations If Performed Along With "Piston & Ring" Jobs. |
| Tune-Up | 0.6 | 0.0 | A | Add The Following Operations If Performed Along With "Piston & Ring" Jobs. |