60. Crankshaft Pulley Installation

^ Tools Required
- J8614-01 Pinion Flange Holder
1. Lubricate the front seal and the sealing surface of the crankshaft pulley with Chassis Grease GM P/N 1051344 or equivalent.





2. Install the crankshaft pulley onto the crankshaft indexing the keyway.

Notice: Refer to Fastener Notice in Service Precautions.





3. Install the crankshaft pulley retaining bolt using the J8614-01 to prevent crankshaft rotation when tightening the bolt.
^ Tighten the bolt to 150 Nm (109 ft. lbs.).