Power Steering Pump Pulley Replacement

Power Steering Pulley Replacement

Tools Required
^ J25034-C Power Steering Pump Pulley Remover
^ J25033-C Power Steering Pump Pulley Installer

Removal Procedure
1. Remove the upper fan shroud.





2. Remove the drive belt.
3. Remove the power steering pump pulley using the 125034-C.

Installation Procedure
1. Place the power steering pump pulley on the end of the power steering pump shaft.





2. Install the power steering pump pulley using J25033-C.





3. Ensure that the power steering pump pulley is flush against the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 in).
4. Install the drive belt.
5. Install the upper fan shroud.