Fuel Hose/Pipes Replacement - Chassis

Fuel Hose/Pipes Replacement - Chassis

Removal Procedure

Caution: Refer to Fuel and Evaporative Emission Pipe Caution.

Caution: Refer to Gasoline/Gasoline Vapors Caution.

Notice: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice.




1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Disconnect the chassis fuel feed line quick connect fitting (2) from the engine line.




4. Disconnect the chassis fuel feed line quick connect fitting from the fuel tank line.




5. Disengage the fuel feed line from the clips (1).
6. Remove the chassis fuel feed line (2) from the vehicle.

Installation Procedure




1. Position the chassis fuel feed line (2) to the vehicle.
2. Engage the fuel feed line to the clips (1).




3. Connect the chassis fuel feed line quick connect fitting to the fuel tank line.




4. Connect the chassis fuel feed line quick connect fitting (2) to the engine line.
5. Lower the vehicle.
6. Inspect for leaks using the following procedure:

1. Turn ON the ignition, with the engine OFF for 2 seconds.
2. Turn OFF the ignition, for 10 seconds.
3. Turn ON the ignition, with the engine OFF.
4. Inspect for fuel leaks.