Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank (2500 LWB - 43.5L (11.5 Gal) Tank-Rear)

EVAPORATIVE EMISSION HOSES/PIPES REPLACEMENT - CANISTER/FUEL TANK (2500 LWB - 43.5L (11.5 GAL) TANK-REAR)

REMOVAL PROCEDURE

IMPORTANT: Clean the evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the fittings in order to avoid possible EVAP system contamination.




1. Remove the rear fuel tank.
2. Remove the EVAP line from the clip (1) on the fuel tank.
3. Open the EVAP line clip (2) and remove the EVAP line from the clip.
4. Remove the EVAP lines from the clip (3).
5. Disconnect the EVAP line quick connect fittings from the fuel tank module.




6. Remove the EVAP lines from the fuel tank.

INSTALLATION PROCEDURE




1. Install the EVAP lines to the fuel tank.




2. Connect the EVAP line quick connect fittings to the fuel tank module.
3. Install the EVAP lines to the clip (3).
4. Install the EVAP line to the clip (2) and close the clip.
5. Install the EVAP line to the clip (1) on the fuel tank.
6. Install the rear fuel tank.