Seat Belt Replacement - Center Rear (Crew Cab)

Seat Belt Replacement - Center Rear (Crew Cab)

Removal Procedure




1. Remove the rear seat shoulder belt guide cover.
2. Remove the body rear trim panel. Refer to Body Rear Trim Panel Replacement (Crew Cab) (Service and Repair)Body Rear Trim Panel Replacement (Regular Cab) (Service and Repair)Body Rear Trim Panel Replacement (Extended Cab) (Service and Repair).




3. Remove the bolt that retains the rear center seat belt assembly to the floor panel.
4. Remove the rear center seat belt assembly from the vehicle.

Installation Procedure




1. Position the rear center seat belt assembly on the floor panel.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the bolt which retains the rear center seat belt assembly to the floor.

Tighten the rear center seat belt bolt to 52.5 Nm (39 lb ft).

3. Route the rear center seat belt webbing up through the guide loop. Ensure that the seat belt webbing is not twisted.
4. Install the body rear trim panel. Refer to Body Rear Trim Panel Replacement (Crew Cab) (Service and Repair)Body Rear Trim Panel Replacement (Regular Cab) (Service and Repair)Body Rear Trim Panel Replacement (Extended Cab) (Service and Repair).




5. Install the rear seat shoulder belt guide cover.