Transmission Shift Position Indicator Lamp: Service and Repair

Automatic Transmission Control Indicator Replacement

Removal Procedure

1. Remove the center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement (with U61) Instrument Panel Accessory Bezel Replacement (with U61)Instrument Panel Accessory Bezel Replacement (without U61) Instrument Panel Accessory Bezel Replacement (without U61).





2. Remove the screws holding the shift indicator to the center console trim bezel and disconnect the electrical connector.





3. Remove the shift indicator from the center trim bezel.

Installation Procedure





Caution:
Refer to Fastener Caution Fastener Caution.

1. Align the shift indicator with the center trim bezel and fasten with the screws and tighten to 2 Nm (18 lb in).

2. Connect the electrical connection to the center trim bezel.

3. Install the center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement (with U61) Instrument Panel Accessory Bezel Replacement (with U61)Instrument Panel Accessory Bezel Replacement (without U61) Instrument Panel Accessory Bezel Replacement (without U61).