Transmission Mount Replacement - Left Side

Transmission Mount Replacement - Left Side

Removal Procedure

1. Support the engine and transmission.

2. Remove the left tire and wheel. Refer to Tire and Wheel Removal and Installation Service and Repair.

3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

4. Remove the engine protection shield. Refer to Engine Splash Shield Replacement.





5. Remove the front transmission mount to frame bolt (1).





6. Remove the rear transmission mount to rear transmission mount bracket bolt (1).

7. Lower the vehicle.





8. Remove the left transmission mount to transmission bolts (1).





9. Remove the left transmission mount to frame rail bolts (1).

10. Lower the transmission enough to provide clearance for the left transmission mount.

11. Remove the left transmission mount (2).

Installation Procedure





1. Install the left transmission mount (2).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the left transmission mount to frame rail bolts (1) and tighten to 27 Nm (20 lb ft).

3. Raise the transmission until the transmission contacts the left transmission mount.





4. Install the left transmission mount to transmission bolts (1) and tighten to 50 Nm (37 lb ft).

5. Raise the vehicle.





6. Install the rear transmission mount to rear transmission mount bracket bolt (1) and tighten to 100 Nm (74 lb ft).





7. Install the front transmission mount to frame bolt (1) and tighten to 100 Nm (74 lb ft).

8. Install the engine protection shield. Refer to Engine Splash Shield Replacement.

9. Lower the vehicle.

10. Install the left tire and wheel. Refer to Tire and Wheel Removal and Installation Service and Repair.

11. Remove the engine and transmission support.