Rear Seat Shoulder Belt Guide Adjuster Replacement

Rear Seat Shoulder Belt Guide Adjuster Replacement

Removal Procedure




1. Open the rear seat belt upper guide shoulder bolt trim cover.
2. Remove the rear seat belt upper guide shoulder bolt.
3. Remove the knob from the rear seat belt shoulder adjuster (1).
4. Remove the body rear corner upper trim panel (2). Refer to Body Side Upper Trim Panel Replacement (Regular Cab, Extended Cab) Body Side Upper Trim Panel Replacement (Regular Cab, Extended Cab)Body Side Upper Trim Panel Replacement (Crew Cab) Body Side Upper Trim Panel Replacement (Crew Cab).
5. Remove the 2 bolts securing the adjuster to the vehicle.
6. Remove the rear seat belt shoulder adjuster from the vehicle.

Installation Procedure





Caution: Refer to Fastener Caution Fastener Caution.

1. Install the 2 bolts securing the rear seat belt shoulder adjuster (1) to the vehicle.

Tighten the rear seat belt shoulder adjuster bolts to 52.5 Nm (39 lb ft).

2. Install the body rear corner upper trim panel (2). Refer to Body Side Upper Trim Panel Replacement (Regular Cab, Extended Cab) Body Side Upper Trim Panel Replacement (Regular Cab, Extended Cab)Body Side Upper Trim Panel Replacement (Crew Cab) Body Side Upper Trim Panel Replacement (Crew Cab).
3. Install the knob on the rear seat belt shoulder adjuster (1).
4. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.

Tighten the rear seat belt upper guide bolt to 52.5 Nm (39 lb ft).

5. Install the rear seat belt upper guide shoulder bolt trim cover.