Transmission Mount Replacement (2WD)

Transmission Mount Replacement (2WD)

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.
2. Support the transmission with a transmission jack.
3. Remove the 2 nuts securing the transmission mount to the transmission support.
4. Raise the transmission off of the transmission support.




5. Remove the transmission mount bolts (4).
6. Remove the transmission mount (3).
7. Remove the transmission mount spacer bolts (1).
8. Remove the transmission mount spacer (2).

Installation Procedure




1. Install the transmission mount spacer (2).
2. Install the transmission mount spacer bolts (1).
3. Install the transmission mount (3).

Caution: Refer to Fastener Caution Fastener Caution.

4. Install the bolts (4) and tighten to 55 Nm (41 lb ft).




5. Lower the transmission and install the 2 nuts securing the transmission mount to the transmission support.
Tighten the nuts to 57 Nm (42 lb ft).
6. Remove the transmission jack.
7. Lower the vehicle.