Front Bumper Fascia Replacement (Equinox)

Front Bumper Fascia Replacement (Equinox)











2.Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement Front Wheelhouse Liner Replacement .

1Front Bumper Fascia Screw (Qty: 4)
Caution:Refer to Fastener Caution .
Tighten 6 N �m (53 lb in)

2Front Bumper Fascia Screw (Qty: 2)Tighten 6 N �m (53 lb in)

3Front Bumper Fascia Retainer


Procedure


Carefully push a small nylon wedge between the fascia and the fender. Insert a small flat-bladed tool into the fascia slot and depress the tabs one at a time and pull on the fascia at the same time to gradually remove the fascia from the fender.

4Front Bumper Fascia


Procedure


Disconnect the electrical connectors.