Engine Mount Bracket Replacement - Left Side

Engine Mount Bracket Replacement - Left Side (L96)

Removal Procedure




1. Remove the engine mount. Refer to Engine Mount Replacement - Left Side (L96) Service and RepairEngine Mount Replacement - Left Side (LC9,LMG,L9H and L94) Service and Repair.
2. Remove the engine mount bracket bolts.
3. Remove the engine mount bracket.

Installation Procedure




1. Position the engine mount bracket onto the frame.
2. Perform the following steps prior to installing the engine mount bracket bolts.

* Remove all traces of the original adhesive patch.
* Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
* Apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the bolts.

Caution: Refer to Fastener Caution Fastener Caution.

3. Install the engine mount bracket bolts.

Tighten the bolts to 100 Nm (74 lb ft).

4. Install the engine mount. Refer to Engine Mount Replacement - Left Side (L96) Service and RepairEngine Mount Replacement - Left Side (LC9,LMG,L9H and L94) Service and Repair.