Engine Mount Bracket Replacement - Right Side

Engine Mount Bracket Replacement - Right Side (L96)

Removal Procedure




1. Remove the engine mount. Refer to Engine Mount Replacement - Right Side (L96) Service and RepairEngine Mount Replacement - Right Side (LC9,LMG,L9H and L94 ) Service and Repair.
2. Remove the engine mount bracket bolts.
3. Remove the engine mount bracket.

Installation Procedure




1. Position the engine mount bracket to the frame.
2. Perform the following steps prior to installing the engine mount bracket bolts.

* Remove all traces of the original adhesive patch.
* Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
* Apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the bolts.

Caution: Refer to Fastener Caution Fastener Caution.

3. Install the engine mount bracket bolts.

Tighten the bolts to 100 Nm (74 lb ft).

4. Install the engine mount. Refer to Engine Mount Replacement - Right Side (L96) Service and RepairEngine Mount Replacement - Right Side (LC9,LMG,L9H and L94 ) Service and Repair.