Input Shaft Seal Replacement

Input Shaft Seal Replacement

Tools Required
* J 36825 Output Shaft Oil Seal Remover
* J 23907 Slide Hammer with Bearing Adapter
* J 42738 Front Output Shaft Seal Installer

Removal Procedure




1. Remove the transfer case. Refer to Transfer Case Assembly Replacement Transfer Case Assembly Replacement.
Important: It may be necessary to use a sharp punch in order to poke a hole into the seal prior to inserting J 36825 .


2. Using the J 23907 (1), and J 36825 (2), remove the input seal.

Installation Procedure




1. Using the J 42738 , install the input shaft seal.
2. Install the transfer case. Refer to Transfer Case Assembly Replacement Transfer Case Assembly Replacement.