Input Shaft Seal Replacement

Input Shaft Seal Replacement

Tools Required

* J 36825 - Output Shaft Oil Seal Remover

* J 23907 - Slide Hammer with Bearing Adapter

* J 42738 - Front Output Shaft Seal Installer

Removal Procedure




1. Remove the transfer case. Refer to Transfer Case Assembly Replacement Transfer Case Assembly Replacement.

Important: It may be necessary to use a sharp punch in order to poke a hole into the seal prior to inserting J 36825 - output shaft oil seal remover.


2. Using the J 23907 - slide hammer with bearing adapter (1), and J 36825 - output shaft oil seal remover (2), remove the input seal.

Installation Procedure




1. Using the J 42738 - front output shaft seal installer, install the input shaft seal.

2. Install the transfer case. Refer to Transfer Case Assembly Replacement Transfer Case Assembly Replacement.